CLEAN POWER.
LOWER BILLS.
You're paying for power you never use. LED drivers, VFDs, and modern HVAC draw electricity in pulses, not smooth waves. That distortion registers on your meter. One hardwired filter in your panel removes it permanently.
PROVEN ACROSS
INDUSTRIES
The Product
INSIDE THE
FILTER
Core technology
- What it is: Two specialized air core inductors wired in parallel on the panel's neutral bus.
- Filters electrical noise: Passes clean 60Hz power while trapping destructive high-frequency neutral harmonics.
- Built for modern loads: Mitigates dirty power generated by computers, LED drivers, and VFDs.
- 100% passive, zero draw: Silent operation with no failure-prone circuit boards or software.
Impact on your facility
- Reduces THD: Traps high-frequency neutral trash before it degrades sensitive electronics.
- Lowers operating temperatures: Less thermal stress in wiring, panels, and transformers.
- Cuts maintenance costs: Extends HVAC motor life, prevents blown LED drivers and nuisance breaker trips.
- Proven savings: Case studies show 10%+ utility cost reductions from reduced transformer core losses and lower neutral draw.
Physics, not promises
- Neutral harmonics cause transformer core losses that register directly on your utility meter, documented by NETA.
- A NETA study recorded a 6.5% kWh drop at the meter immediately after installation, verified with utility-provided data.
- Savings are partly energy and mostly billing. We reduce bills, we don't break physics. Our 10 to 20% is an average, not aggressive.
Where The Savings Come From
10 TO 20%
AVG BILL SAVINGS
Energy plus financial gains, verified against utility billing data.
I²R conductor and neutral losses
Triplen harmonics stack in the neutral instead of canceling, inflating RMS current and resistive heat losses.
Transformer core losses
High-frequency harmonics increase eddy current and hysteresis heating in transformer iron cores.
Power factor penalty reduction
Harmonic distortion degrades true power factor below utility thresholds. Filtering raises it, reducing or eliminating kVA demand penalties.
THE NUMBERS
"By reducing heat in our system, saving energy, and saving equipment, this filter is helping us champion sustainability in our business."
"Finding savings across three buildings seemed an impossible task. I didn't expect much, but the results are undeniable."
Three devices installed at each of 25 locations across Georgia, Alabama, Louisiana, Mississippi, and Tennessee. Buildings ranged from 2,200 to 2,700 sqft. Savings independently confirmed.
"We are not only saving money, we are already seeing savings in maintenance. I don't get five calls a day about issues at the new pumping station since we installed the filters."
NOT ANOTHER
GADGET
What It Costs
PROJECT COST &
TIMELINE
Typical project cost
Projects typically cost about 2 to 3 times your total monthly electric bill, installation included. Each project gets a custom quote.
Time to full ROI
We aim for a 20 month payback period so you reach ROI as soon as possible. You are saving money from the first bill.
SAVINGS
CALCULATOR
Estimates based on verified case study data. Individual results vary based on facility load profile and local utility rates.
Next Step
GET CLEAN
POWER
To deliver higher quality power and a lower bill, we need to understand your facility.
Get a Custom Quote